EP100-12
B.B. Battery EP100-12 is a 12V 100Ah maintenance-free lead-acid battery, specially designed for high-load cyclic applications. It has a long cycle life of up to 2000 cycles, adopts AGM technology, is free of free acid, leak-proof and safe, and supports multi-directional installation. It is suitable for uninterruptible power supplies, telecommunication equipment, medical instruments, golf carts and other scenarios, providing high power and reliable backup power support.
Taobao store
WeChat procurement
Product Features
- Maintenance free(no water topping-up required)
- No free acid(Non-spillable battery)
- The battery is designed for heavy duty cyclic application
- Can be used in any orientation(excluding used inverted)
- Absorbent Glass Mat technology for efficient gas recombination
- Filtered with explosion proof filter
- Flame-arrestor is installed to ensure safety
Application Scenarios
- Uninterruptible power supplies
- Medical equipment
- Lawnmowers
- Electro bikes and scooters
- Golf cars
- Telecommunication facilities
- Data processing centres
- Electric vehicles
- Wheelchairs
- Floor cleaning equipment
Product parameters
- ModelEP100-12
- Voltage12 V
- Nominal Capacity (Ah) 20-hour rate100
- Nominal capacity (Ah) 5-hour rate85
- Nominal capacity (Ah) 30-minute rate50
- Weight (kg)40
- Weight (lb)88.2
- Standard terminal typeB4
- Standard terminal position18
- Optional terminal typeI2
- Optional terminal position-
- Length (mm)407
- Length (inches)16.02
- Width (mm)173
- Width (inches)6.81
- Height (mm)210
- Height (inches)8.27
- Total height (mm)239
- Total height (inches)9.41
Product details
B.B. Battery EP100-12EP Series VRLA Battery is a 12V integrated lead-acid rechargeable battery with nominal capacities ranging from 7 to 100 Ah, among which the EP100-12 model has a nominal capacity of up to 100 Ah (20-hour rate). The series adopts a low-maintenance design and is renowned for its excellent cycle life, capable of providing up to 2000 deep cycle capabilities under normal application conditions, ensuring a long-term reliable user experience.
The battery case is made of sturdy and durable impact-resistant ABS plastic. The battery cover is tightly connected to the shell, and the terminal area is sealed to effectively prevent leakage.Terminal design varies depending on the series and type. EP100-12 provides a standard B4 terminal type, located at position 18. The six filling holes on the battery cover are used for injecting electrolyte during the production stage, and then a pressure relief valve made of non-combustible material is installed. This design not only ensures maintenance-free characteristics, eliminating the need to add water during use, but also achieves a free-acid-free state through efficient internal gas recombination and tight sealing, making it a leak-proof battery and significantly enhancing the safety of use and fire/explosion protection ratings.
In terms of internal structure, EP100-12 adopts the paste-type positive and negative plates and absorbent glass fiber separator technology. This technology optimizes electrolyte retention and gas recombination efficiency, thereby supporting higher power output and longer service life. Its physical dimensions are length 407 mm (16.02 inches), width 173 mm (6.81 inches), height 210 mm (8.27 inches), total height 239 mm (9.41 inches), and weight approximately 40 kg (88.2 lbs). The flexible design allows the battery to be installed and used horizontally or vertically, providing convenience for equipment integration, but care should be taken to avoid inversion.
In terms of electrical performance, the EP100-12, at 12V, not only provides a 20-hour rate capacity of 100 Ah, but also has a 5-hour rate capacity of 85 Ah. Even at a high discharge rate like the 30-minute rate, it still offers 50 Ah capacity, demonstrating its high power output capability to meet instantaneous high-load demands.
These technical parameters, including capacity performance at different discharge rates such as C2, C5, C8, C10, C20, and C100, collectively prove that this battery is suitable for demanding cyclic application scenarios.
Therefore, the EP series batteries, especially the EP100-12 model, are ideal backup power sources for uninterruptible power supply (UPS) systems, telecommunications base station facilities, and various medical equipment.Meanwhile, its high cycle capability and reliable performance also make it highly suitable for high-load mobile applications such as electric wheelchairs, lawn mowers, electric bicycles, scooters, and golf carts. The battery has a designed service life of 5 to 7 years. Combined with its high cycle capability, maintenance-free features, and safe and stable usage experience, it provides a durable energy solution for a wide range of professional and commercial applications.
