HR9-12
HR9-12HR series Valve-Regulated Sealed Lead-Acid (VRLA) batteries are available in 6V and 12V models, with single-cell power ranging from 96 to 1800W. Equipped with an impact-resistant ABS plastic case, the sealed structure ensures safety and leak prevention. The battery supports horizontal and vertical installation, designed for high-rate discharge, providing excellent power output in short-time discharge mode, especially suitable for backup power scenarios within 60 minutes. Its Absorbent Glass Mat (AGM) separator technology enables efficient gas recombination, with a maintenance-free design and an expected service life of up to 10 years. It is an ideal and reliable power solution for fields such as UPS (Uninterruptible Power Supply), security alarms, emergency lighting, communication base stations, and medical equipment.
Taobao store
WeChat procurement
Product Features
- Maintenance free(no water topping-up required)
- No free acid(Non-spillable battery)
- The battery is designed for high rate usage
- Can be used in any orientation(excluding used inverted)
- Absorbent Glass Mat technology for efficient gas recombination
- The power density at 5 min-15min discharging rate is 30% higher than BP series
- Flame-arrestor is installed to ensure safety
Application Scenarios
- Electro bikes and scooters
- Golf cars
- Telecommunication facilities
- Alternative energy sources
- Electrical supply network and power industry
- Street lighting and traffic lights
- Electric vehicles
- Data processing centres
- Wheelchairs
- Floor cleaning equipment
Product parameters
- ModelHR9-12
- Voltage12 V
- 15-minute rated capacity W/cell36
- 10-hour rated capacity Ah8
- Weight kg2.75
- Weight lbs6.06
- Standard terminal typeT2
- Standard terminal position5
- Optional terminal typeB0 B1
- Optional terminal position-
- Length mm151
- Length inches5.94
- Width mm65
- Width inches2.56
- Height mm94
- Height inches3.7
- Thickness mm100
- Thickness inches3.94
Product details
HR9-12HR Series B.B. Battery Valve-regulated Sealed Lead-acid Batteries provide complete 6V and 12V battery packs, with a single battery power ranging from 96 to 1800 watts. Its shell is made of sturdy and durable impact-resistant ABS plastic, offering reliable protection for the battery. The battery cover is tightly integrated with the shell, and the terminal area is specially sealed. Terminal designs may vary for different models. During production, the electrolyte is injected through six filling holes on the battery cover, followed by the installation of a pressure relief valve made of non-combustible materials. This pressure relief valve design significantly enhances the product's fire and explosion protection safety level.
The positive and negative plates inside the battery are coated with specially formulated pasty active materials, ensuring stable electrochemical performance. Thanks to its structural design, this series of batteries supports multiple installation methods, including horizontal and vertical, providing great layout flexibility for users during equipment integration. Under normal use and maintenance conditions, the HR series batteries have a design service life of up to 10 years, meeting Eurobat's standards for long-life batteries.
The HR9-12 model is a 12V product in this series. It is a maintenance-free battery that requires no water addition throughout its entire lifecycle and adopts a free-acid-free design, effectively preventing electrolyte leakage. The multi-directional installation feature (except for inversion) allows it to adapt to various space constraints.This model is optimized for high-rate discharge scenarios. It adopts absorbed glass fiber separator (AGM) technology, achieving an internal gas recombination efficiency of over 99%. This not only reduces maintenance requirements but also enhances safety. Under high-rate discharge conditions of 5 to 15 minutes, its power density is about 30% higher than traditional BP series batteries, enabling stronger instantaneous power output.
Specifically, for technical parameters, the HR9-12 battery has a rated power of 36 watts per cell when discharged to 1.3V per cell in 15 minutes; its rated capacity at the 10-hour rate is 8 Ah. The battery weighs approximately 2.75 kg (6.06 lbs). The external dimensions are 151 mm (length) × 65 mm (width) × 94 mm (height) (respectively approximately 5.94 inches, 2.56 inches, and 3.7 inches)). The standard configuration is T2-type terminals, located at the 5th terminal position. Users can also choose optional terminals of type B0 or B1 according to actual wiring requirements.
B.B. Battery HR series batteries are an ideal power solution for numerous critical applications. It is very suitable for providing reliable power to low-power devices, uninterruptible power supply systems, fire and safety alarm systems, emergency lighting and monitoring systems, access control systems, and various medical equipment. Additionally, it performs excellently in power supply networks, power industry, oil and gas extraction, telecommunication base stations, villas, hotel shops, and auxiliary power sources for electric vehicles.This battery series can provide high specific output power in a short time, especially recommended for backup power scenarios with a backup time not exceeding 60 minutes. Its discharge power range is extensive: when discharged for 15 minutes to 1.3V per cell, a single battery can provide 96 to 1800 watts, meeting the diverse needs of devices from low-power to high-power. The battery capacity ranges from 4 to 75 Ah, with specific capacity values such as C2, C5, C10 varying according to different discharge rates and series models, ensuring performance matching under various discharge systems.
