9BPzB288 - BS Type 32Ah
The BS Traction Series battery provides reliability and long cycle life for industrial power applications, suitable for forklifts, tractors, solar systems, etc. The sturdy tubular plates and microporous separator design enhance deep cycle capability, and the leak - proof structure ensures electrolyte safety. Optional electrolyte circulation and water replenishment systems optimize the charging process and extend service life, complying with ISO 9001 and IEC 60254 standards.
Taobao store
WeChat procurement
Product Features
- Terminals, Grommet and Lid Equipped with special design and integrated without deviation ensures that no electrolyte leak from the cell.
- Top plugs Flip top plugs with electrolyte level markings are fitted. Allow adequate escape of charging gasses and provide a safe anti-surge baffle for the electrolyte during operation.
- Water refill system The aqua level water refill system makes it possible to top up all the cells from one central point through an integrated system. This automatic system ensures the optimum filling level and also allows the measurement of electrolyte specific gravity. The aqua level kit can be expertly fitted at the factory and on-site.
- Electrolyte circulation An optional electrolyte circulation system is Available. Using air-flow principle, consists of a pipe system which creates a circulating air stream inside the cell box. This system prevents electrolyte stratification and the battery charging is optimized.
- APPLICATIONS BPzB batteries are widely recognized as the superior stored electrical energy solution for material handling equipment, road vehicles, tow tractors and other electric vehicles with high energy/ deep cycle requirements.
- BENEFITS Higher running time and battery availability giving increased productivity Optimized design benefit less alloy corrosion giving longer battery life Increased active material surface and utilization gives greater volumetric energy density Product manufactured with a plant approved to quality management standards ISO 9001. Product conforms to IEC 60254.
- Strengthened rib design to maintain structural integrity
Application Scenarios
- olk Lift
- Pallet Jack
- Tow Tractor
- Automated Guided Vehicle
- Solar power generation system
- Electrical supply network and power industry
- Street lighting and traffic lights
- Electric vehicles
- Data processing centres
- Floor cleaning equipment
Product parameters
- Model9BPzB288 - BS Type 32Ah
- Battery Capacity Ah(C5)288
- Dimensions (mm) Length158
- Dimensions (mm) Width158
- Dimensions (mm) Height(1)271
- Dimensions (mm) Height(2)259
- Dimensions (mm) Height(3)-
- Weight with electrolyte (±5%) kg17.6
- Weight without electrolyte (±5%) kg13.4
Product details
In the core field of industrial power, the BS Type 32Ah B.B. Battery traction series, with its excellent reliability and deep cycle life, provides solid energy support for various applications ranging from light to heavy - duty.
Represented by the model 9BPzB288, with a battery capacity of 288Ah (C5) and a compact and sturdy structural design—length 158mm, width 158mm, height 271mm or 259mm depending on configuration—it ensures efficient energy storage in limited spaces. The product weighs 13.4 kg without electrolyte and 17.6 kg with electrolyte, making it easy to move and install.
The success of this battery stems from its precise internal structure.The positive electrode adopts a sturdy tubular plate die-cast from antimony-lead and lead dioxide, while the negative electrode features a flat-laminated design. The combination of the two endows the product with excellent deep-cycle capability. The micro-porous sleeve separator used in between effectively eliminates the risk of short circuits. The battery case and cover, made of high-impact-resistant materials and heat-sealed, ensure excellent high-temperature resistance and anti-electrolyte leakage performance. The combination of these designs with high-tech production equipment not only achieves high consistency in product performance but also fulfills the commitment to reduce environmental impact, reflecting the unified European quality standards of the BS series.
During daily operation, the detailed design of the battery greatly enhances safety and convenience. Terminals, washers, and covers are integrated through a special deviation-free design, fundamentally eliminating electrolyte leakage. The top plug is equipped with a flip cover with liquid level markings, which allows charging gas to fully escape while providing a safe anti-surge baffle for the electrolyte. To simplify maintenance, the Aqua Level water replenishment system enables operators to replenish water for all batteries from a central point through an integrated system. This automatic system ensures optimal liquid level and facilitates electrolyte specific gravity measurement. The relevant kits support professional installation in factories or on-site.In addition, users can also optionally equip an electrolyte circulation system. This system uses the principle of air flow to form a circulating air current inside the battery box through pipes, effectively preventing electrolyte stratification and optimizing the charging process, thereby further improving battery performance and lifespan.
The BS traction battery series is widely used in scenarios with high requirements for energy and cycle life. It is an ideal power source for material handling equipment such as forklifts, pallet trucks, tractors, and automated guided vehicles, and is also suitable for road vehicles and other types of electric vehicles. It also performs exceptionally well in fields requiring reliable energy storage, such as solar power generation systems.Using this battery can bring significant advantages: longer operating time and higher battery availability directly improve equipment productivity; reducing alloy corrosion through optimized design extends the overall service life of the battery; increasing the surface area and utilization rate of active materials improves volumetric energy density. All products are manufactured in factories certified by the ISO 9001 quality management system and comply with relevant international standards such as IEC 60254, ensuring that every link from production to application is reliable and trustworthy.
With a design service life of up to 10 years and a wide range of capacity options from 64Ah to 1296Ah (capacity values are based on different discharge rates such as C2, C5, C8, C10, C20, C100, and vary by series), the BS Type traction battery series meets Eurobat's definition of long-life batteries and is an excellent energy storage solution for industrial applications that pursue high efficiency, high reliability, and sustainable operation.
