8BPzB336 - BS Type 42Ah
The BS traction battery series is specially designed for industrial power applications, offering a capacity range from 42Ah to 1296Ah, with excellent deep cycle capability and long service life. The products adopt optimized tubular positive plates and a sturdy structure, equipped with leak-proof terminals and an automatic water replenishment system, supporting electrolyte circulation to enhance performance. Suitable for high-demand scenarios such as forklifts, AGVs, and solar energy storage, complying with ISO 9001 and IEC standards to ensure reliability and efficient productivity.
Taobao store
WeChat procurement
Product Features
- Terminals, Grommet and Lid Equipped with special design and integrated without deviation ensures that no electrolyte leak from the cell.
- Top plugs Flip top plugs with electrolyte level markings are fitted. Allow adequate escape of charging gasses and provide a safe anti-surge baffle for the electrolyte during operation.
- Water refill system The aqua level water refill system makes it possible to top up all the cells from one central point through an integrated system. This automatic system ensures the optimum filling level and also allows the measurement of electrolyte specific gravity. The aqua level kit can be expertly fitted at the factory and on-site.
- Electrolyte circulation An optional electrolyte circulation system is Available. Using air-flow principle, consists of a pipe system which creates a circulating air stream inside the cell box. This system prevents electrolyte stratification and the battery charging is optimized.
- APPLICATIONS BPzB batteries are widely recognized as the superior stored electrical energy solution for material handling equipment, road vehicles, tow tractors and other electric vehicles with high energy/ deep cycle requirements.
- BENEFITS Higher running time and battery availability giving increased productivity Optimized design benefit less alloy corrosion giving longer battery life Increased active material surface and utilization gives greater volumetric energy density Product manufactured with a plant approved to quality management standards ISO 9001. Product conforms to IEC 60254.
- Strengthened rib design to maintain structural integrity
Application Scenarios
- olk Lift
- Pallet Jack
- Tow Tractor
- Automated Guided Vehicle
- Solar power generation system
- Electrical supply network and power industry
- Street lighting and traffic lights
- Electric vehicles
- Data processing centres
- Floor cleaning equipment
Product parameters
- Model8BPzB336 - BS Type 42Ah
- Battery Capacity Ah(C5)336
- Dimensions (mm) Length158
- Dimensions (mm) Width142
- Dimensions (mm) Height(1)335
- Dimensions (mm) Height(2)323
- Dimensions (mm) Height(3)-
- Weight with electrolyte (±5%) kg20.2
- Weight without electrolyte (±5%) kg15.3
Product details
When you are seeking a reliable and long - lasting energy storage solution for industrial power applications such as material handling equipment, tractors, or automated guided vehicles, the BS traction series batteries, with their excellent deep cycle performance and sturdy, durable design, become an ideal choice to meet the needs of operations ranging from light to heavy duty. Taking the model 8BPzB336 - BS Type 42Ah as an example, this battery has a nominal capacity of 336Ah at a C5 rate. Its compact physical dimensions—length 158 mm, width 142 mm, total height 335 mm (including terminals) or 323 mm (without terminals)—ensure flexible installation in limited spaces. The battery weighs approximately 20.2 kg with electrolyte and about 15.3 kg, balancing energy density and structural strength.
The core advantage of this series of batteries lies in their carefully designed internal structure. Sturdy tubular positive plates are made using a special die - casting process with antimony - lead and lead dioxide, endowing the battery with excellent deep cycle capabilities to easily handle frequent charge and discharge cycles. The negative plates adopt a flat - plate design, paired with elastic, high - strength polyester separators and micro - porous sleeve separators that effectively prevent short circuits, collectively ensuring the stability and safety of the battery's internal structure.The battery casing and cover are both made of high-temperature and high-impact resistant materials, sealed by heat sealing technology, fundamentally preventing electrolyte leakage.
In terms of detailed design, the battery terminals, washers, and cover are specially integrated with no deviation, further ensuring the absolute reliability of electrolyte sealing. A flip-type filling plug with electrolyte level marks is installed on the top. It not only facilitates level observation during daily maintenance but also ensures that gas generated during charging fully escapes, while providing a safe anti-surge baffle for the operating electrolyte, enhancing operational safety.To simplify maintenance and optimize performance, this series can be equipped with an advanced Aqua Level automatic water replenishment system. This system allows quick and uniform water replenishment for the entire battery bank from a central point, automatically maintaining the optimal liquid level, and can easily measure the electrolyte specific gravity. This professional system supports installation at the factory or on-site. Additionally, users can choose to be equipped with an electrolyte circulation system, which is based on the airflow principle. It promotes the circulation of electrolyte within the battery tank through built-in pipes, thereby effectively preventing electrolyte stratification, optimizing charging acceptance, and extending the overall battery life.
These technical features directly translate into actual benefits for users.Longer operating time and higher battery availability significantly improve the production efficiency of equipment such as forklifts, pallet trucks, tractors, and automated guided vehicles. The optimized grid alloy design reduces corrosion, and the increased surface area and utilization of active materials enhance volumetric energy density, collectively contributing to extending the battery's service life. According to Eurobat standards, the designed service life of this battery series can reach 10 years, with a capacity range from 64 to 1296Ah (specific values depend on different discharge rates such as C2, C5, C10), fully meeting the diverse high-energy deep cycle requirements. In addition to the industrial vehicle field, this battery is also suitable for scenarios requiring reliable energy storage, such as solar power generation systems.All products are manufactured in factories certified by the ISO 9001 quality management system and comply with relevant international standards such as IEC 60254, ensuring that each battery has consistent European quality and reliability.
