HRL1234W
HRL1234W is a VRLA valve - regulated lead - acid battery from B.B. Battery's HRL series, with a rated voltage of 12V. It adopts an impact - resistant ABS case and sealed terminal design to ensure leak - proof performance and safety. This battery is specially designed for high - rate discharge, with a discharge power of 132 to 5205W per battery. It is suitable for short - time backup power scenarios ranging from 15 minutes to 1 hour, especially for UPS uninterruptible power supplies, data centers, emergency lighting, and security systems. It is maintenance - free, can be installed in multiple directions, has an expected service life of up to 12 years, and is an ideal choice for commercial and industrial backup power.
Taobao store
WeChat procurement
Product Features
- Maintenance free(no water topping-up required)
- No free acid(Non-spillable battery)
- The battery is designed for high rate usage
- Can be used in any orientation(excluding used inverted)
- Absorbent Glass Mat technology for efficient gas recombination
- The power density at 5 min-15min discharging rate is 30% higher than BP series
- Flame-arrestor is installed to ensure safety
Application Scenarios
- Uninterruptible power supplies
- Medical equipment
- Emergency lighting and video surveillance systems
- Access control and management systems
- Telecommunication facilities
- Data processing centres
- Alternative energy sources
- Electrical supply network and power industry
- Wheelchairs
- Floor cleaning equipment
Product parameters
- ModelHRL1234W
- Voltage12 V
- 10-hour Ah7
- Weight kg2.6
- Weight lbs5.73
- Standard terminal typeT2
- Standard terminal position-
- Optional terminal typeT1
- Optional terminal position-
- Length mm151
- Length inches5.94
- Width mm65
- Width inches2.56
- Height mm94
- Height inches3.7
- Thickness mm100
- Thickness inches3.94
Product details
This HRL1234W HRL series B.B. Battery VRLA battery is a 12 - volt integral lead - acid battery. It uses an opaque and impact - resistant ABS plastic case, ensuring the product's sturdiness and durability. The battery cover is firmly connected to the case, and the terminal area is sealed to effectively prevent leakage. The terminal design varies depending on the specific model. The battery cover is equipped with six filling holes, which are used to fill the electrolyte during the production process. After that, a pressure relief valve made of non - combustible materials is installed. This key design significantly improves the product's fire and explosion safety level.Both positive and negative plates are coated with a special paste-like coating. Combined with the absorbent glass fiber separator technology, it achieves efficient gas recombination, enabling the battery to truly meet the maintenance-free standard. No water addition is required throughout the entire lifecycle, and it contains no free acid, making it a reliable leak-proof battery.
In terms of performance, this battery is optimized for high-rate discharge and can provide excellent specific output power in short-distance discharge mode. Its discharge power range is wide, and when discharged to 1.3V per cell, each battery can provide a power range of 132 to 5205 watts, making it especially suitable as a core component of uninterruptible power supplies (UPS). It is recommended for critical scenarios with a backup time not exceeding 60 minutes. Compared with similar products, its power density has increased by 30% at discharge rates of 5 to 15 minutes. The installation flexibility of the battery is another highlight, supporting horizontal and vertical installation (except for inversion), which facilitates integration into various devices.
In terms of lifespan and capacity, the HRL series batteries have an expected lifespan of up to 12 years under normal operating conditions, meeting Eurobat's long-life standards. Their capacity range covers 5.5 to 215 ampere-hours (specific values such as C2, C10, etc. depend on the test standard), which can meet diverse energy storage requirements.
For the specific HRL1234W model, it has a voltage of 12V, a 10-hour rate capacity of 7Ah, dimensions of 151mm (length) × 65mm (width) × 94mm (height), a weight of approximately 2.6kg, and a standard terminal type of T2.
This battery has a very wide range of application scenarios and is an ideal power source for low to medium power uninterruptible power supply systems, data processing centers, power supply networks, the power industry, emergency lighting, video surveillance systems, access control and management systems, and various medical equipment. In the field of renewable energy, it can also perform excellently in solar and wind energy energy storage systems.In addition, it is also suitable for oil and gas extraction, rural estates, backup power for hotels and stores, and even as auxiliary power for electric vehicles, demonstrating strong adaptability and reliability.
